Ceramic Coating

Ceramic coatings play a major role in protecting the paint of your car. However, you may need to remove ceramic coating for certain reasons and this can give you a headache. You need not worry about going about the removal because this piece will provide the right guidance for you.

In this piece, you will have the opportunity of knowing the reasons for removal, possible problems that  may be associated with the removal and various removal  methods available. Furthermore, different removal  techniques will be discussed including chemical removal, claying and polishing.

Why remove a ceramic coating

Ceramic coatings are hard with the capacity of providing solid protection for many years, unlike sealants or wax.  A lot of manufacturers postulate that they can last longer more than one year, which means that they cannot last for eternity. As a result of this, they need to be eliminated so that a new application can be put in place.

If old ceramic coating is not removed, it can lead to the prevention of the new product to bond or adhere to the surface perfectly. If proper bonding or adherence is not achieved, the durability of the product will be negatively affected. Before you apply a new coating, you should get rid of old one so that the new one can work at its best.

Potential problem when removing a ceramic coating

Ceramic coatings are very hard because they are produced with ingredients similar to the ones used in the production of pottery glaze. Some of these ingredients include silicates, SiO2 and Si3D, which are notorious for a high level of hardness after full curing. This gives them the opportunity to provide long-term protection to any surface of application.

Unfortunately, this hardness level makes it difficult to get them removed when there is any need to do so. A lot of typical clays as well as finishing polish do not have much effect on them while some chemicals, particularly acidic ones, are not capable of providing any solution. Sealant and wax are easier to remove with common finishing polish and clay. This is not so for a ceramic coating.

Different ways to remove ceramic coatings

There are various methods that can be used at get rid of a ceramic coating. The magnitude of the contamination and dirt will go a long way in determining the best method that will be used. In certain instances, the manufacturer will give instructions on the best way to get it eliminated. However, some manufacturers have come up with products that have the capacity of removing the coating.

Chemical removal

There is a high level of resistance of ceramic coatings to many chemicals. However, alkaline products have proved to possess the capability of giving them a great fight. Alkaline products may not have the capacity to get rid of the whole product but they can batter the surface layer thereby leading to negative performance of the product. Best net Review says, It is very important for you to note that a chemical with the capacity of removing a ceramic coating will also have the power to cause damage to the paintwork beneath. Ceramic coating recommended by bestnetreview.com

Claying

Claying can be carried out in conjunction with other removal methods. It is effective on the coating and a large portion can be eliminated, especially when it is partly worn out.

Polishing

Polishing is widely known to be very effective for getting rid of ceramic surface from the surface of your car. It is a very trusted method used by many people. It helps in getting the surface prepared for a fresh product and get rid of specific imperfections.

Protective products are known to be very difficult to visually determine the extent of their absolute removal. If you test with water behavior, you may not be able to get a perfect result because some oil may be left on the surface.

Final Word

In order to remove ceramic coating from the surface of your car effectively, it is very essential for you to follow the guidelines above. It is also advisable for you to get products of high quality so that you will be able to get the best result. You should only deal with reputable sellers in order to avoid complications.